V-Checker iOBD Module B342 OBD2 Diagnosis Interface for IOS Installation instructions

APP installation:

 

Please install V-checker iobd module refer to below steps strictly.

 

Step1: unpack the V-checker iobd module

Step2: Find the OBD connection in your car, It usually located under the steering wheel, above the brake pedal if you cannot find it, Please contact your local 4S dealer

 

Step3: Turn on your ignition key, start your car, keep your car under idle mode.

 

Step4: Plug iobd module into OBD socket correctly the  indicate will keep flashing, System will scan vehicle protocol automatically for 2 minute.

 

Step5: Run V-checker APP, initialize the iobd module settings refer to the steps on the screen.

How to use Car Key Cutter MIRACLE-A7 Key Cutting Machine

 

Single-sided and Double-sided Standard Key and Laser Key:

 

Decode and Cut:

 

Automatic Key Measurement:

 

One Clamp for Holding All Types of Keys:

 

How to use Quickly 4C/4D/46/48 Code Reader

Instruction for Using:

1. The external interface as show in following picture:

2. Identify the chip

Put the chip into the chip read area and click "chip reading and writing". If there is a chip, the corresponding chip and parameter will be displayed, as show in following picture:

3. Copy the chip

For examply: copy the chip 42. Firstly, put the key that can start the original car into the chip reader area to read data, as show in following picture. Then decoder, remove the key of original car, put into the new chip 42, click "copy", as show in next picture--OK!

4. Additional settings

For example: in order to generate the chip 4D67, we first put a blank chip 4D60 into the chip reader area and then click "additional settings"--"key cutting", as show in Fig.(6)---click 67, as show in Fig(7)---generate data---done, as show in Fig.(8)

5. Identify whether Toyota smart key has been used or not

For example: put Toyota smart key into the chip read area and click "additional settings"--- reading of "smart key", it will show you it is new or used.

6. Detect the frequency

Put the key of the remote controller into the frequency detection area in a flat manner, and click "frequency detection" in the menu; then, press any key of the remote controller, and corresponding frequency, ID, modulation mode, speed and other parameters are then show on the screen.

Digimaster 3 Mileage Change Tool Packing List

Digimaster 3 Mileage Change Tool Packing List

Nissan Consult III Diagnosis Tool Tech Support

                                                                 

Nissan Consult III setup instruction:

Installing steps:

1. Install the software in the “CONSULT-III_APPL” file folder;

2. Install the patch in the “CONSULT-III Patch” file folder;(Refer to: /CONSULT-III Install Video /CONSULT-III Install video.html).

Communication modes:

 1. USB 2.0;

 2.Bluetooth (Refer to: /Bluetooth accelerator/Readme.txt).

VI registration:

 Refer to: ../ VI registration/ VI registration.doc or ../ VI registration/ VI registration.ppt

OS requirement:  Windows XP (SP2) or Windows XP (SP3).

Attentions:

 1. You can connect VI to PC by USB or Bluetooth. But you cannot connect with USB and Bluetooth at the same time.

2. When you use Bluetooth at first time, you should run Bluetooth accelerator at first.About serial number:

Nissan Consult III Language:

1, English,2, Finnish,3, French,4, German,5, Greek,6, Italian,7, Japanese,8, Spanish,9, Chinese(Traditional),10, Chinese(simplified),11, Russian.

FAQ(Frequently Asked Question):

Q: What does this item can do and can not do?

A:Nissan counsult III has two model.MI and VI,VI is for diagnose and MI is for waveforms test.Our nissan counsult III can realize the function of VI model but can not do MI model.

Q: Does this item have requirment on laptop?

A:No.Do not have specific requirment on laptop.

Q:Does it come with software?

A: Yes,it come with necessary software.it does not come with laptop in the package.

Q: When running Nissan 3, does it needs serial number?  

A: yes, it needs. 

Q: then where is serial number?

A: there is S/N back of Nissan III main unit. S/N is serial number. 

Q:Whether Nissan Consult III can do GTR?

A: It can do,but customer must have GTR card.

Notes:

1. Be sure to disable/uninstall anti-virus software 

Please note,anti-virus software can flag up Nissan Consult III software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our Nissan Consult III software is completely safe and virus free and all other virus scanners confirm this.

If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP 

Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.

PIN Code Reading Key Programming For Renault K-Line (1996-2013 Year) Procedure

PIN Code Reading and Key Programming Procedure:

Start PINReader.exe VER 3.12 Select from Model Selector "Renault UCBIC" - "Megane I (8 digit PIN)" or "Scenic (8 digit PIN)". Click "Program Key's" for PIN reading and Key programming...

After Read PIN code started "Renault Megane/Scenic Key programming procedure".
After this message insert first Key to program. Switch On Ignition

After "Switch OFF Ignition" first Key is programmed.

Programming procedure for the next key is analogous...

Manual entering PIN code





Read Live Data from UCBIC Module





Read and change Setup IMMO parameters

Renault CAN Clip Diagnosis Interface Setup Instruction

Check the attachment about " Renault CAN Clip setup instruction,Renault Clip setup manual,Renault supported language and compatible car market".


Renault Can clip setup three main steps:
First step: set your PC language as English.
Second step: install "Crack".
Third step:  install “setup.exe”, at this step, you can select the language you want.
Renault can clip 5 days left for registration:
During usage Renault Can clip, when this icon appears,it reminds you 5 days left for registration, you have three options to solve this problem:

Option one : change your computer system time. Because this system works in the following 5 days once you register SPX computer, please change the computer system time at any day earlier than the day you register SPX computer. For example, it is 24th today and you do SPX computer registration, then when this window appears, please set the computer time as 25th. When you come to 28th, please change the system time to 29th, or 30th.
Today it is 24th as follows:

 Change as 25th as follows:

Option two: 
press ctrl+alt+delete, then go to Windows Task Manager

 

Select "Process" to find RSRwin.exe, then "End Process"

Notes:

1. Be sure to disable/uninstall anti-virus software 
Please note,anti-virus software can flag up Renault CAN Clip software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our Renault CAN Clip software is completely safe and virus free and all other virus scanners confirm this.

If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP 
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.

Difference between Digiprog 3 and Digimaster 3

	Digiprog III	Digimaster III
Software Version	V4.94	1.8.1407.14
Screen Size	Smaller	Bigger
Power- on password	1	No need password
Language Supported	Deutsch, English, Espanol, French, Portuguese,Italiano, Turkish, Nederlands	English
Way to change mileage	By OBD2 or dashboard	By OBD2 or dashboard
Update	Users are not allowed to update by themselves (Need to update by update email of  or send the interface back to update.)	Original and update online by users anywhere anytime, and one  year free update.
Vehicle list	For universal car, but cover less vehicle models than( digimaster 3. Cannot do well For Ford, For Benz, BMW, Opel , digimaster 3  can do.	The Best odometer tool for universal car, such as it can change mileage For ford, BMW, Toyota, Benz, VW, Audi,Volvo, Renault,Peugeot and high-end cars.
Vehicle year	Covers vehicles from 1996 to 2013(some can do 2014 year) the vehicle year it covers differs one from the other based  on specific vehicle	Covers vehicles from 1996-2014, the vehicle year it covers differs one from  the other based on specific vehicle.
Tokens	No tokens limited	Item No.SP78 no token limitation, Item No.SP78-B with 980 Tokens
Function	Mainly for setting and programming digital speedometer.	odometer correction, Audio decoding, airbag resetting  engine ECU resetting, IMMO, programming key for Benz &BMW etc
Difference	If you want one mileage correction device to do most normal brand cars, you can choose Digiprog3 is enough.But for the new and high-end cars, you need to use Digimaster 3. At the same time, if you want to choose one multi-function mileage correction, the Digimaster 3 is the best choice. Digimaster 3 contains the advanced technology  of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting; 35080V6 erasure etc.

Xtool PS2 Truck Diagnostic Tool Packing List

Original Xtool PS2 Truck OBD2 Scanner Heavy Duty Diagnosis

添加图片说明

Difference between GM Tech 2 and GM MDI

Difference between GM Tech 2  and GM MDI:

Content	GM Tech 2	GM MDI
Language	GM-English, Germany, Spanish , Japanese, French, Thai , Portuguese, Korean SAAB-English OPEL-English, Italian , Germany,Spanish HOLDEN-English SUZUKI-English ISUZU-English	Multi-language: English, French, German, Japanese, Italian and so on. Total 30 languages to choose.
Update	Via 32MB Software Card	can not update
Activation	no need active	yes
Advantage	cannot plug original software card, but can support original program	can support software from original factory
OS requirement	no need connect to the PC	Win XP only
Internet connection	no need connect to the PC	can not connect to the internet then install the software, because once connect internet, it will remind you update the software
Support Car Model	Cannot support truck, only for cars, Support all GM systems 1992 thru current year. such as GM/ SAAB/ OPEL/ SUZUKI/ ISUZU/HOLDEN	MDI can test all GM car from 1990-2012 year.
Support programing	support reprogramming, but need to use with TIS2000 together	support offline program,such as chevrolet,opel, but not for all cars

GM TECH II Diagnosis Tool FAQ

GM Tech 2 FAQ:

About After-Sales Questions and Answers 

Q1: I bought one GM TECH2 and the TIS2000 software can’t be installed and no identification, what's the problem?

A1: If the TIS2000 you are trying to install is contained in the GM TECH2 software, then it is useless to install TIS2000 software. To program electronic control unit, I advice you buy an extra TIS2000 to work with GM tech2.

Q2: After receiving GM TECH2, I got some errors.

A2: If it is Blue screen, just replace the Blue Screen Chip. If it is not the problem of Blue screen, please send us the self-test report to check where the problem is; have no idea on how to operate self test? Refer the self-test manual at GM TECH2 “technical support / service”.

Q3: GM TECH2 one button doesn’t work how to fix?

A3: If you have new version GM tech2, there are two ways to solve: 

1) we send you a new button to replace; 

2) please send back to repair. If you have old version GM tech2 installed with the newest software, the button maybe won’t work.

Q4: When I use GM TECH2 for the second times, the tool starts to smoke, and my car voltage become 14V from 12V, what’s the matter?

A4: Please follow the correct operation steps: before diagnosing, turn on the ignition and then connect the GM TECH2 with the car, when the car starts you’d better test the voltage, because during this process a part of cars’ voltage will reach up to 24V or more, especially the car which has a poor contact of electrical ground.

About Compatible Vehicle Models and Years

Q1: GM TECH 2 contains Saturn software?

A1: yes, Saturn software is included in the GM software English and support from 1991 to 2010 year.

Q2: Is GM TECH 2 available on my Cadillac year 1996? 

A2: Yes, GM TECH 2 works with Cadillac.

Q3: Does GM Tech 2 work with Australian Holden 1998?

A3: GM tech2 is only compatible with North American Holden, and our software for Holden only work with Holden from 1999-2012.

Q4: Can GM Tech2 work diagnose 2005 GMC - Sierra 1500 truck?

A4: Want to use our GM tech2 to diagnose truck, you need to buy an additional truck adapter, because our GM tech is compatible with truck, but only packed with the car adapter.

About Function

Q1: Does GM tech 2 Support Coding?

A1: Yes, it does, but you need to buy an additional TIS2000, TIS2000 support cars programming until 2007 year.

Q2: Can TECH2 support key coding and electronic control unit programming for all OPEL and Isuzu?

A2: GM tech 2 can't support key programming; as for electronic control unit programming, you need to additionally buy a GM TECH2 and a TIS2000, but TIS2000 only support GM and Opel, not support Isuzu.

Q3: GM TECH 2 support airbag reset? If not, please recommend me another one tool, my car is Chevrolet Tahoe 2007 year.

A3: Yes, GM TECH II support airbag reset for Chevrolet Tahoe 2007 year.

Q4: Does GM TECH II support reading Car VIN number? How to read?

A4: Yes, it does. After selecting the car model, enter function menu, and you will find the VIN number reading option.

Q5: I'm interested in the GM Tech2 Diagnostic Tool and I would like to know which diagnostic functions that tool has for a Hummer H3. I have problems with the windshield wipers, the tire pressure control system and the cruise control. Is that tool able to read the trouble codes and to read some parameters regarding those controllers?

A5:  GM TECH 2 contains Hummer H2 H3 software (from 2007 to 2010 year), so Tech2 is able to diagnose Hummer H3 2007-2010 year.  As for reading parameters regarding those controllers, it is theoretically compatible, advice you have a try.

Q6: Can GM Tech 2 send commands to the various modules and is it able to do diagnostics on a climate control programmer? To what year is the scanner effective? I own a 1997 Cadillac DeVille and a 2001 Chevrolet Venture.

A6: Yes, you can use GM TECH 2 to diagnose climate control programmer, when it has communication GM Tech2 can send commands to the modules.

Contact Inforation for BOWShine Technology Trade Co., Limited

Mob Online chat:
Whatsapp/Vbier/Webchat/Messenger: 86-18098983455



Tel: 86-755-84732086
Mob: 86-18098983455
E-mail: info@bowshine.com
Skype/Facebook: bowshine@outlook.com
Web: www.bowshine.com /  www.uobd2shine.com
Linkedin: http://www.linkedin.com/in/bowshine
Blogspot: http://bowshine.blogspot.com
Facebook: https://www.facebook.com/emilia.bowshine
Facebook: https://www.facebook.com/auto.diagnosis.tools.bowshine
Twitter: https://twitter.com/OBD2BOWShine
Google+: https://plus.google.com/+BOWShineTechnologyTradeCoLimited

What is the difference Among Easycoding, SVDI, ICOM A2, FVDI for BMW

BMW Diagnosis Tool

BMW ICOM A2+HDD Software+Dell D630 Laptop

FVDI ABRITES Commander For Bmw and MINI +Hyundai+ Kia+Tag V10.4

Item Number
Item Name	2015 Easycoding V1.3.0.150407	SVDI Diagnostic Interface	BMW  ICOM A2+B+C	2015 FVDI ABRITES Commander for BMW
Software Version	V1.3.0.150407	VW, Audi, Skoda, Seat: V18 BMW: V9.6 TAG key tool: V5.8 SVDI Plugin Version: V2.3	V2015.3	V10.4
Languages	English, Russian, German, French, Spanish, Japanese, Italian, Korean, Dutch, Polish, Thai, Turkish, Czech, Portuguese, Indonesian, Swedish, Greek	VW, Audi, Skoda, Seat Software Language Available: English, Simplified Chinese, German, Spanish, French, Russian, Italian, Danish, Czech, Bulgarian TAG Key Tool Software Language Available: English	English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Chinese, Japanese, Korean and Thai.	English Only
Support Car Model	BMW, Rolls-Royce (2010y-2014y)	VW,Audi,Skoda,Seat,BMW,TAG	BMW	BMW,MINI BMW
Update	Send Software download link	Send Software download link	Dual-Core Processor, it is recommended that the I3 above. More than 4G of memory. Lenovo ThinkPad X200, X230, X230T, X61T, T410, X61,Dell D630, E49 etc.	WIN7,WINXP
Main Function	Program, Coding	VW,Audi,Skoda,Seat,BMW,TAG read error code,diagnose	BMW testing and program, can not program key and ecu	diagnose, program and odometer
Difference	1. Easycoding main program F Series vehicles 2. ICOM A2 is original maintain programming diagnose tool, full functions, it can support part of Easycoding and SVDI function 3. FVDI can do key programming, odometer, others can not support