2017年9月20日星期三

launch easydiag 2.0/easydiag plus in stocks

发帖者 时间： 没有评论:

2017年9月18日星期一

Original Xeltek USB Superpro 610P Universal Programmer

Original Xeltek USB Superpro 610P Universal Programmer 
Original Xeltek USB Superpro 610P Universal Programmer
Operating System: Windows XP, Vista and Win7

Xeltek USB Superpro 610P Features:
Support 218 IC manufacturer, 30493 pcs devices.
Support devices with Vcc from 1.2V to 5V.
Extremely fast speed hign than SUPERPRO/500P.
Built with 48 universal pin-drivers. 
PC hosted mode and stand-alone mode. Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
ISP/ICP programming capability available via ISP/ICP adaptor.
Only IC manufacturer approved programming algorithms are used for high reliability. (+5%~-5%) and (10%~-10%) Vcc verification enhances programming reliability.

Advanced and Powerful Functions.
Production mode start chip operation at the moment the chip is inserted in the socket properly. 
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one touch step.
Password can be set for project files and production volume control
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
 
 Device             P+V(s)         Compare with SP3000U     type
 AT28C64B      0.8(P)+0.1(V)= 0.9(s)      1.2(P)+0.8(V)= 2.0(s)      64Kb EEPROM
 24AA128      2.7(P)+1.8(V)= 4.5(s)      5.0(P)+4.0(V)= 9.0(s)      128Kb EEPROM
 QB25F640S33B60      29.0(P)+14.4(V)= 43.4(s)      55.2(P)+41.4(V)= 96.6    (s)      64Mb  EEPROM
 AT89C55WD      2.5(P)+0.4(V)=2.9(s)      3.3(P)+1.0(V)=4.3(s)      20KB FLASH MCU
 S25FL064A      43.9(P)+14.7(V)= 58.6(s)      72.8(P)+41.4(V)= 114.2(s)      64Mb SPI EEPROM
 PIC16F876A      10.1(P)+0.8(V)=10.9(s)      22.1(P)+06.2(V)=28.3(s)      
 PIC18F442      5.1(P)+1.1(V)=6.2(s)      13.6(P)+06.7(V)=20.3(s)      

Hardware & Electrical Specifications:
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU. Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, CSP, SCSP , ...
PC interface: USB2.0
Stand-alone Feature: None .
Electrical spec. of the AC adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power:15W
Mechanical parameter: Main unit: Size: 178*130*40 mm Weight: -Kg.

Accessories:
Main unit with a DIP48 adaptor, AC adaptor, USB2.0 cable, software CD (include: install software, user manual), register card
Optional accessories: adaptor in varies packages.

Contact us:
Mob/Viber/Webchat/Whatsapp: 86-18098983455

Skype: bowshine2010

How to buy from: bowshine.com
If you want wholesale price, please contact with us so that we could offer you wholesaling price.

发帖者 时间： 没有评论:

2017年9月15日星期五

ECU Decoder For Renault With Engine Immobilizer System

ECU Decoder For Renault With Engine Immobilizer System

From the year 1994 most Renault cars are equipped with engine immobilizer system and it makes replacement of injection computer more complicated.

ECU Decoder For Renault 
There is no problem if replacement ECU is bought from Renault service dealer - it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.

Decoding tool has several modes of operation and deals with all known petrol and diesel injection systems, introduced in range of year 1994-2001 without intervention in to the ECU (diesel coded anti-start valve as well). After decoding process is completed, control unit became de coded - as it was bought from dealer. ECU must be taken out from the car and connected to the decoding tool according to user manual.

Tested System for Renault ECU Decoder:
Petrol:
Siemens Fenix3
Siemens Fenix5
Siemens Sirius32
Sagem Safir(55pin)
Sagem Safir2(55pin)
Bosch Motronic MP7.0
Magneti Marelli IAW 06R

Diesel:
Bosch MSA 15.5(DTI)
BOSCH EDC15C3(DCI)
LUCAS DCU3R(1.9D)
Code Fuel Cut-off valve(1.9D DDS)
Decoding of engine control units manufactured in range of year 1994-1996 is semi-automatic, from year 1996 - fully automated. Especially this tool can be useful when rubber-filled FENIX5, SAFIR2 or coded diesel anti-start valve must be decoded. This tool will decode all listed type 1 and 2 immobilizer systems..
Buying this tool you will be supplied with all required information: user manual and connection diagrams. Decoding tool is stand-alone, no PC is required.

The following ECU’s will need a valid immo code:
Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V
All of SIRIUS32 except for KANGOO 1.4l 16V - You can attach the immo emulator on this ECU after decoding 

LUCAS DCU3R, Bosch MSA15.5 and EDC15C3
This means that after the decoding procedure on one of these ECU is done, you must have the immobilizer system fully operational (matching key) to start the engine.Otherwise after decoding the above ECU’s you can use a Renault emulator

Contact us:
Mob/Viber/Webchat/Whatsapp: 86-18098983455

Skype: bowshine2010

How to buy from: bowshine.com
If you want wholesale price, please contact with us so that we could offer you wholesaling price.



发帖者 时间： 没有评论:

ADS007 CAT SIS 2015 Installation Steps video

发帖者 时间： 没有评论:

Powergate V3.86 - Personal OBD Programmer

Powergate V3.86 - Personal OBD Programmer 
Powergate is the most versatile device ever created for serial programming via diagnostic plug. By using all the newer protocols of communication (K-LINE, CAN and J1850), Powergate can read and write the Electronic Control Unit of many vehicles on the market.

Powergate V3.86 - Personal OBD Programmer
Powergate has an internal memory which can contain, in addition to the original file, two different maps. In this way, the owner of the vehicle has always at his disposal two different developing steps of the map, to be uploaded on the ECU at any moment.

Updating protocols of communication has never been so easy: a connection to the internet and a few minutes are all it is required to access Alientech Data Bank for downloading everything is needed to make Powergate operative on the largest number of vehicles as possible. This solution was studied for different operating situations, as it is suitable both to professional tuners who want to propose a product always up-to-date, than to users who make use of Powergate solely on their own cars. A very versatile device with first-class features.

The display of items on its large screen is very simple. The device itself will guide you through the reading and writing of the ECU, with clear and detailed instructions. Another interesting innovation of Powergate is the option to quickly and easily check and erase DTC Errors.
PWGpro is the software to manage Powergate, a simple interface that guides user from choosing the vehicle, to saving and uploading several mapping files, ready to be written directly on the vehicle.

Versions
To better meet our customers' needs, Powergate is proposed in the following versions, each addressed to a different target:
Powergate M - available from version M01 to M12, is addressed to professional tuner only for programming vehicles of a certain brand.

Customizations
Alientech gives his dealers the opportunity to customize Powergate with their company logo or a personal brand. You can customize your faceplate, using any pattern and color. You can even customize the software interface and the logo that is shown on the display when you turn on the device, thus your customized Powergate becomes the winning solution for promoting your own brand.

Minimal Requirements
Powergate II is compatible only with Windows Vista and Windows7.

Contact us:
Mob/Viber/Webchat/Whatsapp: 86-18098983455

Skype: bowshine2010

How to buy from: bowshine.com
If you want wholesale price, please contact with us so that we could offer you wholesaling price.



发帖者 时间： 没有评论:
标签：

2017年9月14日星期四

V1255 BDM100 Universal PROGRAMMER

V1255 BDM100 Universal PROGRAMMER 
BDM100 ECU chip tuning tool is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
V1255 BDM100 Universal PROGRAMMER
Version: V1255

Description:
BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
BDM 100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).
BDM 100 allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).

The software allows to read and program the WHOLE ECU content of:
29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present)
MOTOROLA MPC5xx Processor file
Serial Eprom content.

Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved (if the original software has been previously stored).

Package List:
1pc x BDM 100 Interface.
1pc x ECU Connecting Cable with 3 Adapters
1pc x USB Connecting Cable

Contact us:
Mob/Viber/Webchat/Whatsapp: 86-18098983455

Skype: bowshine2010

How to buy from: bowshine.com
If you want wholesale price, please contact with us so that we could offer you wholesaling price.



发帖者 时间： 没有评论:
标签：
订阅： 博文 (Atom)